An Overview of the Window Tinting Process

The market for car window tinting is worth over $10.3 billion. Installing the films is a complex process that requires a professional hand. It’s worth the time and investment because it has several benefits other than making your windows darker.

Car tint placed blocks dangerous UV rays, helps your car retain heat, increases safety, and more. This explains why it’s becoming more and more popular. 

Read on to learn more about the window tinting process so you know what to expect before you begin.


Tint shops all have a specialized environment for applying tint film. It’s free of dust and debris that could wedge itself between the adhesive and the window and cause it to fail.

Once your car enters this environment, it gets cleaned with a soap and water solution applied with a sponge and squeegee. The inner surface of the window gets an extra cleaning because it’s the part where the window film will be installed. A razor blade removes dirt and the glue residue on new cars.

Measuring and Cutting

Fitting the film to your car’s windows is one of the most important steps of the window tinting process. The installer starts by measuring them and cutting pieces of film to meet them.

They’ll then lay them on your windows and make cuts along the bottom, left, and right. A heat gun shrinks the film and helps it match the exact contours of your window. The last step is to roll it down slightly and cut the top.


The measured window film doesn’t go onto your window immediately after it’s been measured and heated. It first has to go onto a pane of glass known as the “peel board.” This helps with 2 major tasks of the window tint process; rounding out sharp edges and removing the release liner. 


When the film is measured precisely, the installer sprays soapy water, activating its adhesive so that it can be easily attached. 

The film gets placed adhesive side down onto the window. A squeegee removes excess solution, and plastic scrapers remove any bubbles and smooth the edges.

The installer may also use a heat gun. This helps dry the soapy water and contour the film onto the window. 

Inspecting and Drying

The final step is to look at how well the tint film has attached itself to the car glass. It’s important to check it from the inside and outside and smooth out any remaining imperfections.

The installer will let you know when the job is complete. They’ll tell you to let it dry for at least 3 days before rolling down your windows. It may take a few weeks for the adhesive to cure and any bubbles or hazy appearance to go away.

Finding the right installer to complete the window tinting process ensures you get the best results. Rely on Classic Series window tinting to get the right film that fits your windows exactly.

More on the Window Tinting Process

Car tint is appearing on more and more windows because of the many benefits it provides. It’s a great way to make your car look better while also keeping it safe and regulating the temperature inside.

The window tinting process involves several steps. They include preparing the environment, measuring, cutting, and peeling the film, installing it, inspecting the results, and letting it dry. 

Read the rest of our content for more window tinting information.

Leave a Reply

Your email address will not be published. Required fields are marked *